Thursday, July 31, 2014

Gunpla #23 - RG Zaku II Review


My fifth RG as well as my first Zaku kit :-)

The idea of building Zaku actually came from nowhere. I just walked around a shopping mall to see some new kits, then I saw this guy. Well, I haven't bought any gunpla kits for more than 6 months, hence how about givin a try to this kit ?? Furthermore, I didn't have any Zakus in my collection. So, that's it. The green Zeon mobile suit box got into my room few hours later. I prefer the green Zaku over the red Char's custom Zaku, because I love grunt suits better.


I had almost no major problems building the Zaku, well, except for those springs for the leg cables. Somehow, they're too short to hold the pipe pieces, hence the cables sometime popped out while the legs were bent. Therefore, I glued the top two pipes on each ends of the cables and finally It solved the problem.



Aesthetically, this kit looks beautiful. The panel lines and color separation just perfect. The articulation was also quite good. I said 'quite good' because, while the hands and legs were able to do some great poses, the waist joint and skirts on the other hands were terrible. Sometimes they just fell or popped out the place. I also had small incident with the head. When I put the head for the first time, I felt the neck was too long and looked really different from the manual. Hence I push down the head stronger, and finally the click sound was heard and the head finally had correct neck length. I was scared that the head will be broken because of the force. Anyway, IMO, the best gimmick of this kit also came from the head. When the head turn left or right, the eye will also move to the direction. It's very cool.




This kit came with many accessories. You got Zaku machine gun, Zaku bazooka and a heat axe. Other than normal RG hands, you'll also get standard trigger hand and open hand. And of course, as any other RG kits, this Zaku had a large sheet of clear stickers. I had to admit, the stickers of RG Zaku were probably the best I've ever seen for an RG kit. The color of stickers just blend perfectly with the kit :-)



Final thoughts, this was a great RG kit. The articulation was quite good, great gimmicks, lots of accessories and nice decals. Just be careful with those legs cable and you'll be OK :-)   

-------------

MS-06 Zaku II (Mass production type)

Pros :
  • Highly detailed kit with lots of panel lines
  • Lots of accessories and great clear stickers
  • Nice head visor gimmicks
Cons :
  • Poor articulated waist and fragile skirts
  • Spring cables on both legs tends to pop out easily
  • The head need to be pushed forcefully to get proper neck length, hence vulnerable to be broken if you're not careful.

Wednesday, July 30, 2014

Meteo #11 - Cara Mengatasi GXSTRT Error pada OpenGrADS di Windows

Sebelumnya, mumpung masih dalam suasana lebaran, saya ingin mengucapkan Minal Aidin wal Faidzin. Mungkin pada tulisan-tulisan sebelumnya ada kata-kata yang salah atau menyinggung perasaan pembaca, mohon saya dimaafkan. Maklum, saya juga manusia yang masih terus belajar dari kesalahan :-)

Bila pada tulisan-tulisan sebelumnya saya lebih banyak mengulas teknik atau tips dalam menggunakan GrADS. Kali ini saya ingin sharing sedikit tentang troubleshooting, khususnya untuk OpenGrADS. Sekilas info bagi yang belum pernah menggunakan aplikasi ini, OpenGrADS, sesuai namanya adalah versi GrADS yang open-source. Ciri khas lainnya yang mungkin lebih menggoda : OpenGrADS bisa dijalankan di Windows (Selamat buat para Linux haters ^^). Walaupun bisa dijalankan di Windows, OpenGrADS pada dasarnya tetap membutuhkan lingkungan Linux, sehingga instalasi aplikasi ini di Windows umumnya dibarengi oleh emulator Linux seperti Cygwin dan X-ming server. Sehingga, tak jarang terjadi masalah ketika aplikasi ini dijalankan.

Masalah yang akan dibahas kali ini adalah kesalahan GXSTRT, ketika OpenGrADS tidak mau membuka jendela display pada saat mulai dijalankan. Kesalahan ini tidak terjadi ketika OpenGrADS dijalankan pada batch mode (opsi -b). Lucunya lagi, kesalahan ini terjadi pada OpenGrADS versi 2.0.1 ke atas. Saya sudah mencoba versi yang lebih rendah dan tidak menemukan kesalahan ini. Tiap kali saya memperbaharui OpenGrADS ke versi terbaru, kesalahan ini selalu terjadi.

Kurang lebih tampilan kesalahannya seperti di bawah:


Selidik punya selidik, kesalahan ini tidak terjadi ketika PC terhubung ke internet atau LAN. Jadi kesimpulan sementara, kesalahan ini disebabkan karena X-ming server membutuhkan jaringan untuk dapat menampilkan jendela display. Kenapa bisa begitu, saya juga belum paham, karena pada versi sebelumnya tidak pernah ada masalah seperti ini.

Solusinya ? Sudah jelas, anda harus terhubung ke jaringan. Nah kalo PC anda stand alone dan tidak ada jaringan yang bisa dihubungkan dengan PC ? Bikin aja jaringannya. Nggak mesti harus fisik, tetapi bisa virtual.

Bagi anda yang sudah menginstalasi VMware, selamat. Sejak pertama diinstalasi, VMware akan membuat jaringan virtual pada PC, sehingga kesalahan GXSTRT ini tidak akan terjadi. Untuk yang tidak menginstall VMware, anda juga bisa tetap mengakali si X-ming server ini dengan menginstall Microsoft Loopback Adapter. Caranya sebagai berikut :

  • Masuk ke Device Manager. Caranya klik Start. Lalu klik kanan Computer dan pilih Properties. Ketika jendela info komputer terbuka, perhatikan panel sebelah kiri, dan klik Device Manager.

  • Klik PC anda. Lalu pada menu pilih Action - Add legacy hardware.

  • Pada wizard, pilih "Install the hardware that I manually select from a list (Advanced)".
  • Pada daftar pilih "Network Adapter" dan klik Next. Tunggu sampai Windows memuat semua device network adapter.

  • Pada daftar "Manufacturer", pilih "Microsoft". Lalu pada daftar Network Adapter, pilih "Microsoft Loopback Adapter". Lalu klik Next. Tunggu sampai proses instalasi selesai.
  • Jalankan kembali OpenGrADS, dan kali ini jendela display akan bisa ditampilkan.

Selamat mencoba.